Motor Yacht in Glass Reinforced Plastic

The Motor Yacht in glass reinforced plastic will be built using the most modern techniques and first quality materials, according to the rules and regulations and certified by the Italian Classification Society R.I.Na. Malta Cross. The hull has been tank tested at the Vienna Model Basin in order to optimise performance and stability.

Technical Characteristics

Length o.a. m. 35,25
Length waterline m. 29,90
Max. beam m. 7,20
Draft under propellers m. 2,180
Displacement when empty tons 109
Displacement full loaded tons 135

ENGINES

No.03 Marine Diesel Engines CATERPILLAR type C32 ACERT at 1.825 HP (1343 kW) each, complete with No.02 REINTJES reduction gears for the right and left engine type WVS 430/1 Ratio 2,727:1, and No.01 REINTJES two speed reduction gear for the centre engine type ZWVS 730 Ratio 2,708 – 3,250:1.

On request at an extra cost: No.02 Marine Diesel Engines MTU type 12 V 4000 M90 at 2774 HP (2040 kW) each, complete with ZF reduction gears type 4650 Ratio 3:1.

PROPELLERS: No.03 with four/five blades in Nibral, S-Class

Maximum speed half loaded Knots 28
Cruising speed half loaded Knots 24
Range in miles half loaded N/m approx 650
Range at max load – at reduced speed (centre engine only) N/m approx 1100
Fuel capacity Lt. 25000
Fresh water capacity Lt. 3500
Black grey water capacity Lt. 2000

GENERATORS: N°02 generator sets KOHLER at 55 kW – 50 Hz

ACCOMODATION
Passengers N° 8
Passengers bathrooms N° 4
Crew N° 6
Crew bathrooms N° 3
Day toilet on main deck N° 1